PACER...the total adhesive system.

PT-38 Pacer Zap Epoxy 5 Minutes Resin & Harderner total 236ml.

• Clear formula
• Quick setting - 5 minutes
• Tough, permanent bond
• Excellent gap filling and shock resistant

PACER'S QUICK SET Z-POXY SYSTEM is specially formulated to bond fiberglass, wood, metals, plastics, etc. Produces a tough permanent bond in just 5 minutes. Is resistant to shock and solvents; is non-shrinking and has excellent gap filling characteristics.

CAUTION: CONTAINS EPOSY RESIN & MERCAPTAN HARDENER. Avoid contact with skin and eyes. May cause eye / skin irritation with direct contact. In case of direct eye contact, flush with water for 15 minutes and consult physician. Wash hands and skin thoroughly with soap and water after use. if swallowed, seek medical advice immediately and show container label. KEEP OUT OF REACH OF CHILDREN.

DIRECTIONS:

1. Surface should be clean, dry and free of grease or oil.
2. Roughen surface with sandpaper for best results.
3. Remove caps and puncture tip of each bottle.
4. Squeeze out equeal amounts of resin and hardener.
5. Mix thoroughly and apply a small amount to both surfaces. Bond set time is only 5 minutes. Clamping is not required, but allow 5 minutes before moving parts. Full cure in 16 hours.
6. Remove excess glue immediately with denatured alcohol.

NOTE: Times are approximate. Times may increase or decrease slightly on temperature and humidity.